Vornado iControl Spezifikationen PDF herunterladen (Seite 4)

English

Getting Started

Using your Vornado Heater is easy. Just follow these simple

steps.

1. Position your heater so the vortex beam of warm air is

directed across the room, unobstructed. Position it in a

location that is representative of the room temperature.

Avoid areas of temperature extremes such as cold drafts and

heat registers. Please refer to IMPORTANT INSTRUCTIONS

at the beginning of this owner’s guide.

2. Plug power cord into a standard grounded wall outlet.

3. Press the Power button.

4. One-Knob Operation

This innovative user interface is sophisticated yet simple.

Press the knob to “wake-up” or turn on the screen on the

base unit, rotate the One-Knob control unit until the desired

mode you want to adjust is displayed. Press the button to

accept this mode, then, rotate the knob left or right to select

desired setting. The unit is then set, or you may press the

One-Knob again to adjust another mode, and continue to

adjust additional settings in the same manor.

5. Remote Control

Fully control the Heater remotely with the Remote, no more

getting up to adjust the temperature. You can turn the unit

On and Off switch the mode from Fan Only, to Low Heat or

High Heat, adjust the desired set temperature up or down,

and set the automatic-off timer. As you adjust the remote,

the base unit will “beep” to indicate that it has received your

signal.

iControl Operating Controls

Power On/Off

Front light illuminates when power

is on.

Mode

HIGH HEAT 1500 watts, LOW

HEAT 750 watts, or FAN ONLY.

Temperature

Allows you to select your desired

comfort level. Use the UP arrow

to raise the set temperature. Use

the DOWN arrow to lower the set

temperature.

Timer

The timer can be set in hour

intervals up to 9 hours. Press the

TIMER button to go into timer

mode. In timer mode, use the

UP arrow to add hours. In timer

Grounded Heavy-Duty Power Cord

Adds durability and a more secure wall connection.

Tight Grill Spirals

Resists curious ﬁngers.

Cool Touch Case

Safe to touch, even on high heat setting.

Automatic Safety Shut Off System

If airﬂow becomes blocked and overheating occurs,

power to the heating element and fan is shut off.

Tip-Over Switch Protection

If tipped more than 10 degrees in any direction, heat

and fan functions immediately shut down.

Ideal 120°F Exit Air Temperature

Warm enough to heat an entire room.

Resetting Your Vornado Heater

Your Vornado Heater has a multi-level safety shut-off system

designed to prevent overheating. Overheating may occur when

the inlets or outlet are blocked, a foreign object prevents the

blade from turning, or the appliance tips over. If this happens,

the safety shut-off system will cut power to the heat element

and you will need to manually reset the heater.

1. Set the Power switch to Off and unplug the unit.

2. Remove any obstructions.

3. Wait 5 –10 minutes, allowing the unit to cool down.

4. Plug in the unit and place in desired position.

5. Set the Power switch to On. Your Vornado Heater should now

function normally.

Note: If the safety shut-off system repeatedly shuts off your

heater or if it will not reset after following the above procedure,

DO NOT ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado

Consumer Services Department toll-free at 1-800-234-0604.

mode, use the DOWN arrow to

remove hours.

Remote

The remote control functions the

same as the unit

controls. The remote requires 2

AAA batteries. To

replace the batteries remove the

cover located on the

bottom side of the remote.

Sound

When a setting is changed you will

hear a “beep”

from the unit.

LCD Display

Dims for no-glow night operation.

How To Use Advanced Safety FeaturesHow To Use

1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Vornado iControl Spezifikationen Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Raumheizungen Vornado iControl